Ultima Paint Guard Wash - easy application steps!

Ultima Paint Guard Wash - easy application steps!

Ultima Paint Guard Wash - easy application steps!

Ultima Paint Guard Wash - easy application steps!

 Ultima Paint Guard Wash - easy application steps!

For best results first wash the vehicle with Ultima Paint Guard Wash and then use Ultima Elastrafoam to remove contaminants if needed.  Next you can polish or use Ultima Paint Prep Plus as a light polish and primer-in-one.

You do not have to use Ultima Paint Prep Plus but it is recommend for very best results. If you do not use Ultima Paint Prep Plus, then you should clean the paint after polishing so Ultima Paint Guard Plus bonds properly. 

 

Follow the thorough guide below and you will be able to protect all of your paint in 20 minutes!

Ultima Paint Guard Plus is extremely easy to apply. The mistake people make is they apply too much. Apply it by hand and follow the directions! Below is a preferred method for application and use.

1.-Shake the bottle.
2.-Take the supplied clean dry Ultima Paint Guard Applicator and spray once onto it to prime it.
3.-Spray it once more and complete a 3 square foot area.

4.-Apply in circular motions making sure to overlap and cover the entire area thoroughly. You are not polishing so there is no need to rub too hard or over and over. Finish with straight lines from front to back of the panel. Another thing to look for is that your applicator is no longer leaving anything on the paint. On silver or light colors it’s sometimes hard to tell.  If you are no longer sure if anything is on the pad touch a clean window with the applicator and you'll see if there is still product on the applicator.
5.-If I don't see anything then its time to spritz more on the applicator.
6.-Repeat until you get to the last panel. Now, just walk away. There may or may not be a slight film on the paint, but it starts it's bonding process immediately.  DO NOT touch.  Wait 45 minutes or longer and inspect. There should be no need to do anything else. This is not a product that you have to buff off. In the unlikely chance that there is a streak after 45 minutes of curing you may wipe it with a quality microfiber towel or simply allow it to cure longer (up to 12 hours).  After that if a streak remains simply take some Ultima Detail Spray and spray and wipe the streak with a high quality microfiber  towel.

Keep the vehicle garaged and out of the dew over night to allow Ultima Paint Guard Plus to fully cure for 12 hours.

Sit back and enjoy the gloss or go for a ride and relax with the knowledge your paint is well protected and can easily be maintained with Ultima Waterless Wash and Ultima Paint Guard Wash as needed.

Intimidated by the idea of Polishing with a Machine?

Intimidated by The Idea of Polishing with A Machine?
Don’t be, the Sonus SFX Polishing System makes it easy!

Sonus SFX polishes and SFX foam pads have corresponding numbers so you’ll never be confused about which products to use together.

Where to Start

Start with Sonus SFX-1 Restore Polish with the Sonus SFX-1 Scratch and Defect Removal Pad to remove serious defects from paint. To remove swirls and minor imperfections, follow with Sonus SFX-2 Enhance Swirl Remover Polish and Sonus SFX-2 Enhance Swirl Remover Pad. Bring out the shine with Sonus SFX-3 Final Finish Polish and the Sonus SFX-3 Final Finish Foam Polishing Pad

Time to Polish

Now that the defects have been removed and the surface has been polished, protect it with Sonus SFX-4 Paint Sealant applied with the Sonus SFX-4 Final Gloss Seal & Protect Pad. Sonus SFX-4 Paint Sealant is boosted by Polycharger® for months of superior protection.

®

®

®

®

Minor Imperfections

Not all paints will require all polishing steps. If your paint has only minor imperfections begin with Sonus SFX-2 Enhance Swirl Remover and work through the process. Each step prepares your paint for the most important step, sealing. Sonus SFX foam pads are available in 4” and 6” sizes and easily attach to the UDM Connector 3.0 and the UDM Connector 5.0 backing plates. The hook and loop design of the Connectors easily and securely attaches to the hook and loop backed Sonus pads which makes changing pads more convenient.

Ultimate Detail Machine

We recommend the Sonus Polishing System be used with the Ultimate Detail Machine by Porter Cable. This dual action polisher is powerful enough to take on any surface, but will not leave swirls behind as can be the case with high speed buffers.

Why Use Tire Dressing?

Why Use Tire Dressing? 

The purpose of tire dressing is two-fold. First it protects your tires preventing premature drying and cracking. Second, it gives your vehicle a clean, polished look.

What are the Most Effective Tire Dressings?

The most effective tire dressings are those that apply evenly and do not sling. Ultima Tire & Trim Guard Plus is a revolutionary new tire dressing that will exceed your expectations. Ultima Tire & Trim Guard Plus is applied quickly and evenly with the included applicator and will not sling onto paint or leave greasy residues on tires or hands. Use Ultima Tire & Trim to protect wheels and rims from brake dust, road grime and other contaminants. One coat will leave a slick barrier of protection that will not wipe away!

How to Clean your Engine in 4 Easy Steps

How to Clean your Engine in 4 Easy Steps

Remove Debris

The first step in cleaning your engine is to remove the excess debris that gets trapped under the hood. A medium to high pressure jet of water will remove loose debris and begin to soften surface contaminants. Be careful not to get water in engine’s electrical components.

Engine Cleaner or Degreaser

Follow with an engine cleaner or degreaser such as Sonus All-In-One Total Auto Cleaner or Four Star Products Multi-Purpose Cleaner. Spray a generous amount of cleaner on engine and engine compartment surfaces. Agitate with a sturdy brush to loosen remaining contaminants.

Rinse

Rinse with a jet of water to remove remaining dirt, grease and grime. For areas with heavy soiling a second application of cleaner may be required.

Dry and Protect

Allow engine to dry completely before applying a coating of protectant. Sonus Trim & Motor Kote offers outstanding protection to engine components. It prevents drying and delays the degradation of rubber hoses, plastic clips and cables. And it deposits a protective barrier on metal, aluminum and painted surfaces making them dust resistant.

The Ideal Solution

Sonus Trim & Motor Kote is a water-based, non-flammable engine, undercarriage and trim dressing that is safe for all engine compartment surfaces and is an ideal solution for large areas of plastic cladding including truck bed liners, rocker panels, wheel well liners and black plastic valances.