Ultima Tire and Trim Guard is EASY TO USE!

Surface Care Specialist

Before & After  1 month

Ease of Use:

As with all of the sealants in the Ultima line, ease of use was at the forefront of its development goals from the beginning.  It’s as simple as follows based on the surface for application:

1. Ensure area to be treated is clean and dry.
2. On large areas, dispense directly onto the finish and rub in with Ultima Tire Handi Grip Applicator.  
3. On smaller surfaces, dispense onto applicator and apply to the desired finish.
4. On porous surfaces, such as tires and rubber trim, allow Tire & Trim Guard Plus to dry without buffing.
5. On hard, glossy surfaces, such as your wheels and chrome trim, buff dry to a high gloss shine. Wipe off Ultima Tire & Trim Guard with a microfiber towel within one minute to avoid difficult removal.
6. For additional gloss on tires, a second coat may be applied after 20 minutes. 

Additional tip: 

On trim that has previously had low quality dressing, the prep and cleaning is by far the most important part.  To allow UTTG to bond with the surface you must first remove the existing oil, grease, and oxidation left behind by previous products.  Scrub oxidized plastic trim with Four Star Vehicle OEM Multi-Purpose Cleaner and a PFC Microfiber towel and rinse completely clean and then allow to dry thoroughly before application.